GÜVEN ICE MACHINES
+90 (216) 611 96 45
TR EN

128/900 Automatic ICE Machine

MAKİNELERİN ÇALIŞMA PRENSİBİ

Cihazlarımız, içerisindeki mekanik sistem sayesinde tamamen otomatik çalışmaktadır. İlk çalıştırma esnasında cihazlarda 6 dakikalık bir zaman rölesi devreye girecek süre tamamlandığında makine çalışmaya başlayacaktır. Elektronik beyinden gelen komut sayesinde cihaz defrost‘tan başlayarak su haznesi bağlı olduğu aktüatör sayesinde aşağı yöne doğru hareket edecektir.

Defrost süresi yaklaşık olarak 2 ile 3 dk arasındadır. Bu süre tamamladıktan sonra beyinden gelen 2. Komut aktüatör sistemini devreye alarak su haznesini buz yapmak üzere yukarı yönde hareket ettirecektir.

Su haznesi yukarı çıkarken cihazlar aynı anda elektronik sıvı seviye kontrol rölesi sayesinde su almaya başlayacaktır.

Tavsiye edilen buz yapma süresi ortalama 70 dk’dır. Buz yapma süresi tamamlandıktan sonra aktüatör aşağı yönde hareket ederek yapmış olduğu buzları izoleli haznesine boşaltacaktır.

Kapasitesine göre hazneler buz ile dolduğu zaman sistem kendini otomatik olarak kapatır. İçerisinden buz alındığı takdirde tekrar devreye girerek çalışmaya başlar.

Cihaz çalıştığı sürece sistem bu şekilde otomatik olarak bütün işlemleri tamamlayarak kullanıcısına hiçbir zahmet çektirmeden çalışmaya devam eder. Kullanıcının yapması gereken cihazın kapağını açıp içerisinden buz almaktır.

NOT: Buz ölçülerimiz 5 cm çapında 21 cm uzunluğundadır. Bu sayede hiçbir miksere zarar vermeden çalışmaktadır.

WORKING PRINCIPLE OF THE MACHINES
Our devices operate fully automatically thanks to the mechanical system inside. During the first start-up, when a 6 minute time relay completes, the machine goes on. Thanks to the command from the computer, the device will move downwards, starting from defrosting through the actuator to which the water tank is connected.

Defrost time is approximately between 2 and 3 minutes. After this time is over, the second command from the computer activates the actuator system and moves the water tank upwards to make ice.

While the water tank moves upwards, the devices will simultaneously start taking water thanks to the electronic liquid level control relay.

Recommended ice-making time is approximately 70 minutes. After the ice-making time is completed, the actuator moves downwards and discharges the ice into its insulated tank.

According to its capacity, the system automatically shuts down when the tank is filled with ice. In case the ice is taken from inside, it re-engages. As long as the device is running, the systen automaticcally completes all operations in this way and continues to work without any trouble for the user. What the user needs to do is to open the cover of the device and take ice from it.

NOTE: Our ice measurements are 5 cm in diameter and 21 cm in lenght. In this way, it works without damaging any mixer.


Technical Specification
Model 128/900
Height 175
Amplitude 110
Depth 98
Weight 200
Water Injet 3/4
Water Outlet 3/4
Water Drain 3/4
Purge Drain 3/4
Energy 380v 50 Hz 15A
Daily Capacity 900 lt
Hopper Capacity 250 lt
Liquid Fluid 404A



© Copyright GÜVEN BUZ MAKİNELERİ - 2025
We use cookies to provide a better browsing experience on our website. Continuing to browse our website means you accept our use of cookies. For detailed information about cookies, please review our Cookie Policy. X